Terms & Conditions
 Items:, Value: |  View Cart |  Checkout |
 
thomas flinn 
 
homeproducts site mapcheck outsearchcontact us
 
 

Robert Sorby Lathe Chucks & Jaw Sets

World of Woodworking |  Robert Sorby Lathe Chucks & Jaw Sets

New to the site.... Robert Sorby Lathe Chucks & Jaw Sets....


Robert Sorby RSPC Patriot Chuck

Robert Sorby RSPC Patriot Chuck

Quantity:

Please select required thread size:


One of the latest lines to be added to the Robert Sorby range - The Patriot Chuck. The all British manufactured Patriot Woodturning Chuck is fitted with 2" (50mm) jaws. These have an internal and external dovetail and gripped teeth for greater secure work holding. It is also supplied with a screw chuck and an insert (various sizes available) to fit all available lathes in the country.

Benefits to the Patriot Chuck are as follows:

~ fits all available lathes in the country
~ light and compact, yet ideal for all sizes of project
~ comes complete with 2" jaws fitted and screw chuck as standard
~ single key operation requires the lightest touch
~ smooth opening and closing action every time
~ all jaws are dovetailed on the inside and outside with extra serated teeth for additional positive grip
~ wide choice of optional jaws and accessories provides added versatility

Thread sizes available are as follows:

3/4" x 16
7/8" x 16
1" x 8
1. 1/4" x 8
1" x 10
1" x 12
3/4" x 10
1" x 10 left hand
7/8" x 12 left hand
1. 1/8" x 12
1. 3/8" x 6
1. 1/2" x 6
1. 1/2 x 8
18mm x 2.5
20mm x 1.5
20mm x 2
25mm x 2
24mm x 3
30mm x 1.5
30mm x 3.5
33mm x 3.5

All prices are shown exclusive of VAT
Robert Sorby LRSJPEN Pen Jaws

Robert Sorby LRSJPEN Pen Jaws


Price: £20.79
(Excluding VAT at 20%)

Quantity:


New addition to the Robert Sorby Jaws range for the Patriot Chuck....

These Jaws will hold your pen blank central so you can drill on the lathe. A "V" groove in both jaws ensure you have a tight secure grip of the pen blank. Mount your drill chuck into your tailstock and simply wind in the drill. With these jaws being mounted on a lathe, you have more control over the speed of the motor and a much better control of the feed speed.

These jaws have been designed to fit a Robert Sorby Patriot Chuck and Supernova Chuck.

Robert Sorby RSJ1 Jaws - 1

Robert Sorby RSJ1 Jaws - 1" (25mm)


Price: £28.49
(Excluding VAT at 20%)

Quantity:


The Robert Sorby RSJ1 Jaws have a fine internal and external dovetail and so make these jaws pefect for fine intricate or miniature projects.




Robert Sorby RSJP Pin Jaws 1

Robert Sorby RSJP Pin Jaws 1" (25mm)


Price: £37.91
(Excluding VAT at 20%)

Quantity:


These Robert Sorby Pin Jaws 1" (25mm) have a multitude of uses. Ideal for small projects utilising the fine internal and external dovetail. The extra length of the jaws makes them perfect for working with awkward pieces of wood including burrs.


Robert Sorby RSJ15 Jaws 1 3/8

Robert Sorby RSJ15 Jaws 1 3/8" (35mm)


Price: £31.12
(Excluding VAT at 20%)

Quantity:


The Robert Sorby 1 3/8" (25mm) Jaws are designed for small projects such as boxes and small bowls up to 6" diameter.


Robert Sorby RSJ3 Jaws 2 3/4

Robert Sorby RSJ3 Jaws 2 3/4" (70mm)


Price: £41.85
(Excluding VAT at 20%)

Quantity:


The Robert Sorby RSJ3 Jaws 2 3/4" (70mm) are for bigger bowls and projects up to 13" diameter that need a little more substantial hold.


Robert Sorby RSJ4 Jaws 3 1/2

Robert Sorby RSJ4 Jaws 3 1/2" (89mm)


Price: £43.61
(Excluding VAT at 20%)

Quantity:


The Robert Sorby RSJ4 Jaws 3 1/2" (89mm) allow for even bigger bowls up to 16" diameter to be held securely.

Robert Sorby RSJ5 Jaws 4 1/4

Robert Sorby RSJ5 Jaws 4 1/4" (108mm)


Price: £45.36
(Excluding VAT at 20%)

Quantity:


The Robert Sorby RSJ5 Jaws 4 1/4" (108mm) make large bowls and platters over 16" diameter to be turned due the much bigger spigot or recess this set of jaws allows.

NEW! Robert Sorby RSJZ Zero Jaws

NEW! Robert Sorby RSJZ Zero Jaws


Price: £45.14
(Excluding VAT at 20%)

Quantity:


The Robert Sorby Zero Jaws are a new addition to the Patriot Chuck accessory range. This innovation in this item is that the jaws literally do close up to zero, hence the name! This feature is very useful when turning very delicate and miniature pieces combined with the domed shape allowing close access with micro tools without the danger of any sharp corners that you would get with normal shaped jaws. These also allow projects to be supported internally using the dome shape without marking the wood. These jaws are a must have for any woodturner making fine detailed projects.
Robert Sorby RSJDG Deep Grip Jaws

Robert Sorby RSJDG Deep Grip Jaws


Price: £45.36
(Excluding VAT at 20%)

Quantity:


The Robert Sorby RSJDG Deep Grip Jaws is designed with deep sides to give extra grip on large logs and awkward pieces of wood. They also have a large internal and external dovetail to securely hold large bowls in excess of 16" in diameter.


Jaws are 4 1/4" (108mm) in diameter.


NEW! Robert Sorby RSWC Wobble Chuck

NEW! Robert Sorby RSWC Wobble Chuck


Price: £49.53
(Excluding VAT at 20%)

Quantity:

A new product to suit the Patriot Chuck accessory range. The Wobble Chuck is a simple yet effective multi-axis chuck that fits into the standard jaws allowing small off-centre pieces to be turned. It is designed to fit neatly into the standard 2" (50mm) jaws. The upper and lower sections of the Wobble Chuck are wedge shaped so that when the upper section is rotated and locked into any position this off-sets the wood. It opens up a whole new world of woodturning opportunities, allowing the woodturner to make small eccentric pieces such as off-set stem goblets, quirky trinket boxes and even small ornamental spoons. The chuck can be used as a small faceplate or a screw chuck by using the screw included depending on the project being turned. The Wobble Chuck gives any woodturner the opportunity to experiment with off-set eccentric turning at an economical price.
Robert Sorby Centre Steady

Robert Sorby Centre Steady

Quantity:

Please select required size:

The Robert Sorby Centre Steady is designed to hold long thin work pieces: snooker cues, lamp stands and banister spindles. It has fully adhustable fingers for total control and the bearings on the fingers will not burn the timber. It is adjustable for 1/8" - 4" diameter work depending on the centre height.

Available in 3 centre heights: 5 1/2 - 7 1/8", 7 1/8" - 8 7/8" or 8 7/8" - 10"

All prices are shown exclusive of VAT
Robert Sorby RSJBR Bowl Reversing Jaws

Robert Sorby RSJBR Bowl Reversing Jaws


Price: £49.92
(Excluding VAT at 20%)

Quantity:


These Robert Sorby Bowl Reversing Jaws are perfect for finishing the outside and bottom of any bowl. Lightweight but extremely strong aluminium plates with 10 positions and 8 rubber grips to gently hold the outside of a bowl without causing any damage to the turned piece.


Robert Sorby FPR80 Face Plate Ring 3 1/8

Robert Sorby FPR80 Face Plate Ring 3 1/8"


Price: £12.71
(Excluding VAT at 20%)

Quantity:


The Robert Sorby FPR80 Face Plate Ring has an outer diameter of 3 1/8" (80mm) and is designed with an internal dovetail to fit securely onto the standard 2" (50mm) jaws. These rings work in the same way as normal faceplates but with the convenience of the easy chuck fitting. Also available with an outer diameter of 4 3/4" .


Robert Sorby FPR120 Face Plate Ring 4 3/4

Robert Sorby FPR120 Face Plate Ring 4 3/4"


Price: £14.46
(Excluding VAT at 20%)

Quantity:


The Robert Sorby FPR120 Face Plate Ring as an outer diameter of 4 3/4" (120mm) and is designed with an internal dovetail to fit securely onto the standard 2" (50mm) jaws. These rings work in the same way as normal faceplates but with the convenience of the easy chuck fitting. Also available with an outer diameter of 3 1/8".


Robert Sorby RSJC Custom Jaws

Robert Sorby RSJC Custom Jaws


Price: £18.85
(Excluding VAT at 20%)

Quantity:


The Robert Sorby RSJC Custom Jaws are made from high quality nylon. These jaws can be turned using normal woodturning tools to suit any project time and time again.

Robert Sorby RSJLN Long Nose Jaws

Robert Sorby RSJLN Long Nose Jaws


Price: £53.91
(Excluding VAT at 20%)

Quantity:


The Robert Sorby RSJLN Long Nose Jaws allows rough turned bowls to be remounted internally with the reach of almost 4" of these jaws. Extra access to the back of a tuned piece is acquired due to the tapered shape and the dovetail being 2" away from the chuck body.

Robert Sorby Steb Drive

Robert Sorby Steb Drive

Quantity:

Please select required size:


The Robert Sorby Steb Drive when held securely by the jaws of the Patriot Chuck, ensures an unrivalled grip on any wood. It uses the same innovative head design as the original Stebcentre, holding the wood securely with its forward facing serrated teeth and spring loaded centre pin.

Available in three sizes: 1/2", 7/8" and 1 1/4".

All prices are shown exclusive of VAT
Robert Sorby RSPDC Drive Centre

Robert Sorby RSPDC Drive Centre


Price: £12.05
(Excluding VAT at 20%)

Quantity:


The Robert Sorby RSPDC Drive Centre is a simple but very effective 4 prong drive centre that fits directly into the jaws of the chuck.
Robert Sorby Stebcentres

Robert Sorby Stebcentres

Quantity:

Please select required option:


The Robert Sorby Stebcentre is an invaluable accessory for every woodturner. Fitted in the lathe head-stock, it is a boon for the novice and the experienced. Its ring of sharp teeth ensure that the Stebcentre bites the wood to give more security and drive. Because there are several points of contact there is minimal risk of splitting. The Stebcentre can be used with equal confidence on both soft and hardwoods as well as synthetic materials. In its patented design the Stebcentre also features a spring-loaded point. By slightly backing off the tail-stock, the work piece still remains resting between the revolving centre and the Stebcentre. This allows the turner to inspect his work without the need to switch off the lathe. Where time is a critical factor, the Stebcentre is ideal as the work-piece can be quickly removed without stopping the lathe.

Overall length - 4".

Available in 3 different head sizes - 1/2", 7/8" and 1 1/4". Also in 1 Morse Taper, 2 Morse Taper in all sizes and 3 Morse Taper on the 1 1/4" size only.

All prices are shown exclusive of VAT
Robert Sorby Stebdrive

Robert Sorby Stebdrive

Quantity:

Please select required option:


Developed from the intial stebcentre, the Sorby Steb Drive has been adapted so that it fits in to most popular 4 jaw lathe chucks. This saves the need to remove the chuck every time the turner wants to use his Stebcentre.

Available in three head sizes - 1/2", 7/8" and 1 1/4"

All prices are shown exclusive of VAT
Robert Sorby Revolving Stebcentres

Robert Sorby Revolving Stebcentres

Quantity:

Please select required options:


Another idea devised from the Sorby Stebcentre is something inspired by Norweigan turner Petter Herud - a series of Revolving (or Live) Stebcentres has been introduced.

Not only do these offer the same degree of security as the conventional Stebcentre, but they have been allowed the turner to experiment with basic off-centre turning.

Available in 3 head sizes - 1/2", 7/8" and 1 1/4" and in both 1 and 2 Morse Taper for all sizes.

All prices are shown exclusive of VAT

World of Woodworking |  Robert Sorby Lathe Chucks & Jaw Sets