Saws - Specialised Products inc. Two Man Crosscut Saws

World of Woodworking | Saws - Specialised Products inc. Two Man Crosscut Saws

Thomas Flinn offers a range of specialised products for a variety of applications. Many of these products have been made here for many years and have become some of our more obscure items of manufacture. These are made to order, please be aware there may be a delay despatching these during busy periods.

3 foot One Man Crosscut Saw

Price: £60.61
(Excluding VAT at 20%)

Quantity:

One of our most popular mail order requests, our One and Two Man Cross Cut Saws have proved to be a much sought after product. These large saws are used mostly in forestry work and the crosscutting of large logs. But in recent years, these have been bought by people aiming to cut their own fire wood etc. They are a great alternative to chain saws in both a safety and environmental way and can be used by anyone! Get the family to help!

The 3 foot One Man Cross Cut Saw has a clear finished beech handle and comes complete with an auxiliary handle which can be attached to the front of the blade so you can get some additional assistance with cutting if necessary. The handle can also be fitted to the top of the blade to help you push the blade if using alone. The teeth are a Great American style tooth which uses gullets to enable the waste wood to be cleared whilst cutting.

These saws have also been featured in the Discovery Channel's "How It's Made" programme - this is to be aired in the UK on 23rd September 2010 @ 8.30pm but will be viewable on re-runs.

Maintenance: The large file (as seen on this page and on the sharpening page) is used for sharpening these items. Saw setters are too small for saws with teeth of this size.

Sizing advice: we recommend a saw length that is double the size of wood you are wanting to cut. This is to ensure that you can get enough stroke in your cutting.

Due to the length of these there may be a surcharge added to carriage if sending outside the UK and to the Scottish Highlands. Please contact me for more information if you are planning on ordering and shipping overseas.

Key Features:
* Beech Handle plus Auxiliary Handle for use as a Two Man version if required
* Special Great American Tooth pattern for use on logs etc
* Can be re-sharpened using a Large file

Related products:

1. Robert Sorby Draw Knives

2. New! Ray Iles "Mike Abbott" Drawknife

3. Files

Spare Auxiliary Handle for Crosscut Saw

Price: £10.00
(Excluding VAT at 20%)

Quantity:

As used (and supplied as standard) with our 3ft One Man Crosscut Saw, this auxilary handle is attached to the blade to assist cutting with the crosscut saws and means the one man saw can be adapted to a 2 man saw if needed.

Made from beech with steel fittings, this handle should fit any One Man saw that has a hole in the blade so can be used to replace lost handles or revamp old saws. This fitting has been specially produced so that the steel fitting slides on the blade, the specially shaped washer has notches in so that the blade lines up correctly. The rivet then slots through the hole in the fitting and holds the handle in place.

PLEASE NOTE - THIS ITEM IS SUPPLIED WITH ANY 3FT ONE MAN CROSSCUT SAW PURCHASED

All prices are shown exclusive of VAT

Related products:

1. Two Man Cross Cut Saw

Two Man Cross Cut Saw

Quantity:

Please select a size

One of our most popular mail order requests, the One and Two Man Cross Cut Saws have proved to be a much sought after product. These large saws are used mostly in forestry work and the crosscutting of large logs. But in recent years, these have been bought by people aiming to cut their own fire wood etc. They are a great alternative to chain saws in both a safety and environmental way and can be used by anyone! Get the family to help!

The teeth on the Two Man Cross Cut Saws work in a way that the teeth cut on the pull stroke on each side of the tooth and so actually cut in each pulling direction. The Two Man Cross Cut Saws come with two wooden handles. Available in a range of sizes to suit your needs from 4ft-8ft (click drop down box to see sizes and prices).

These saws have also been featured in the Discovery Channel's "How It's Made" programme - this is to be aired in the UK on 23rd September 2010 @ 8.30pm but will be viewable on re-runs.

Maintenance: The large file (as seen on this page and on the sharpening page) is used for sharpening these items. Saw setters are too small for saws with teeth of this size.

Sizing advice: we recommend a saw length that is double the size of wood you are wanting to cut. This is to ensure that you can get enough stroke in your cutting.

Due to the length of these, notably 4ft and over, there will be a surcharge added to carriage if sending outside the UK and to the Scottish Highlands. Please contact me for more information if you are planning on ordering and shipping overseas.

Key Features:
* Pair of Beech Handles and fittings to attach handles to blade
* Peg Tooth formation allows cutting on both push and pull stroke through the wood
* Can be Re-sharpened using a Large File

All prices are shown exclusive of VAT

Related products:

1. Files

2. Spare Auxiliary Handle for Crosscut Saw

3. NEW! Ray Iles Large Froe

4. Ray Iles Mini Froe