Terms & Conditions
 Items:, Value: |  View Cart |  Checkout |
 
thomas flinn 
 
homeproducts site mapcheck outsearchcontact us
 
 

Tool Sets - Various Types

World of Woodworking |  Tool Sets - Various Types

A selection of tool sets - a great way to purchase various products which offer the best selling sizes complete in a box.

These also make great gifts!


NEW! Sheaf River Bevelled Edge Butt Chisels - Tapered bolster and ferrule

NEW! Sheaf River Bevelled Edge Butt Chisels - Tapered bolster and ferrule

Quantity:

Please select required option:


New from Robert Sorby for 2012! The Sheaf River woodworking tools is a range of specialist tools for the discerning woodworker. Its orgins are inspired by the river Sheaf which runs beside the Sorby factory and has been one of the main driving forces behind the steel industry for more than four centuries in Sheffield.

The Robert Sorby Sheaf River Bevelled Edge Butt Chisels combine the elasticity and hard wearing properties of sustainably sourced American Ash with the finest Sheffield steel and hand craftsmanship. These chisels are drop stamped from high carbon material blanks to produce a blade with an edge capable of being sharpened to half a micron - four times sharper than a disposable razor!

All these chisels are handmade by craftsmen using over 200 years of knowledge in tool production. A high level of quality control ensures each blade is diamond hardness tested before leaving the factory.

There are two types of the Bevelled Edge Butt Chisels available:

The traditional bolster and ferrule version and the Tapered bolster and ferrule version.

This version is the Tapered Bolsgter and ferrule version

Sizes are as follows:
1/4", 3/8", 1/2", 3/4", 1"
Use the drop down box to show sizes and prices.

Set of 4 includes: 1/4", 1/2", 3/4" and 1"
Set of 5 includes: 1/4", 3/8", 3/4" and 1"

All prices are shown exclusive of VAT


NEW! Sheaf River Bevelled Edge Butt Chisels - Traditional Bolster and Ferrule

NEW! Sheaf River Bevelled Edge Butt Chisels - Traditional Bolster and Ferrule

Quantity:

Please select required option:



New from Robert Sorby for 2012! The Sheaf River woodworking tools is a range of specialist tools for the discerning woodworker. Its orgins are inspired by the river Sheaf which runs beside the Sorby factory and has been one of the main driving forces behind the steel industry for more than four centuries in Sheffield.

The Robert Sorby Sheaf River Bevelled Edge Butt Chisels combine the elasticity and hard wearing properties of sustainably sourced American Ash with the finest Sheffield steel and hand craftsmanship. These chisels are drop stamped from high carbon material blanks to produce a blade with an edge capable of being sharpened to half a micron - four times sharper than a disposable razor!

All these chisels are handmade by craftsmen using over 200 years of knowledge in tool production. A high level of quality control ensures each blade is diamond hardness tested before leaving the factory.

There are two types of the Bevelled Edge Butt Chisels available:

The traditional bolster and ferrule version and the Tapered bolster and ferrule version.

Sizes are as follows:
1/4", 3/8", 1/2", 3/4", 1"
Use the drop down box to show sizes and prices.

Set of 4 includes: 1/4", 1/2", 3/4" and 1"
Set of 5 includes: 1/4", 3/8", 3/4" and 1"

All prices are shown exclusive of VAT
NEW! Sheaf River Bevelled Edge Chisels - Traditional Bolster and ferrule

NEW! Sheaf River Bevelled Edge Chisels - Traditional Bolster and ferrule

Quantity:

Please select required option:



New from Robert Sorby for 2012!
The Sheaf River woodworking tools is a range of specialist tools for the discerning woodworker. Its orgins are inspired by the river Sheaf which runs beside the Sorby factory and has been one of the main driving forces behind the steel industry for more than four centuries in Sheffield.

The Robert Sorby Sheaf River Bevelled Edge Chisels combine the elasticity and hard wearing properties of sustainably sourced American Ash with the finest Sheffield steel and hand craftsmanship. These chisels are drop stamped from high carbon material blanks to produce a blade with an edge capable of being sharpened to half a micron - four times sharper than a disposable razor!

All these chisels are handmade by craftsmen using over 200 years of knowledge in tool production. A high level of quality control ensures each blade is diamond hardness tested before leaving the factory.

There are two types of the Bevelled Edge Chisels available:

The traditional bolster and ferrule version and the Tapered bolster and ferrule version.

This option is the Traditional Bolster and Ferrule version

Sizes are as follows:
1/4", 3/8", 1/2", 3/4", 1"

Use the drop down box to show sizes and prices.

Available as individual chisels or as a set of 5.


Set of 5 includes: 1/4", 3/8", 3/4" and 1"


*** These chisels scored a tidy 4 out of 5 stars for these in Good Woodworking magazine, issue 262 January 2013. ***



All prices are shown exclusive of VAT
NEW! Sheaf River Bevelled Edge Chisels - Tapered Bolster and Ferrule

NEW! Sheaf River Bevelled Edge Chisels - Tapered Bolster and Ferrule

Quantity:

Please select required option:



New from Robert Sorby for 2012! The Sheaf River woodworking tools is a range of specialist tools for the discerning woodworker. Its orgins are inspired by the river Sheaf which runs beside the Sorby factory and has been one of the main driving forces behind the steel industry for more than four centuries in Sheffield.

The Robert Sorby Sheaf River Bevelled Edge Chisels combine the elasticity and hard wearing properties of sustainably sourced American Ash with the finest Sheffield steel and hand craftsmanship. These chisels are drop stamped from high carbon material blanks to produce a blade with an edge capable of being sharpened to half a micron - four times sharper than a disposable razor!

All these chisels are handmade by craftsmen using over 200 years of knowledge in tool production. A high level of quality control ensures each blade is diamond hardness tested before leaving the factory.

There are two types of the Bevelled Edge Chisels available:

The traditional bolster and ferrule version and the Tapered bolster and ferrule version.

This option is the Tapered Bolster and Ferrule version.

Sizes are as follows:
1/4", 3/8", 1/2", 3/4", 1"

Use the drop down box to show sizes and prices.

Available as individual chisels or as a set of 5.


Set of 5 includes: 1/4", 3/8", 3/4" and 1"

*** These chisels scored a tidy 4 out of 5 stars for these in Good Woodworking magazine, issue 262 January 2013. ***


All prices are shown exclusive of VAT
Robert Sorby 5HSTROLL 5 Piece Turning Set in Leather Tool Roll

Robert Sorby 5HSTROLL 5 Piece Turning Set in Leather Tool Roll


Price: £118.45
(Excluding VAT at 20%)

Quantity:

A great way of buying a set of tools in an economical way, this Sorby Turning Tool Set comes complete with 5 tools in a high quality leather tool roll.

These turning tools are made from High Speed Steel and are hardened and tempered with polished flutes and hand finished ash handles.

The 5 piece set contains:

1 x 3/4" Roughing Gouge
1 x 3/8" Spindle Gouge
1 x 3/8" Bowl Gouge
1 x 1/8" Parting Tool
1 x 1/2" Round Nose Scraper

An excellent gift for those wanting a basic range of high quality turning tools....
Robert Sorby 888HS6TLR Modular Micro Tools in Leather Tool Roll

Robert Sorby 888HS6TLR Modular Micro Tools in Leather Tool Roll


Price: £95.00
(Excluding VAT at 20%)

Quantity:

New for Xmas 2011 .....
A great gift but also a great way to store your tools... this all-round 6 piece micro woodturning set is ideal for woodturners interested in turning small and delicate pieces.

It includes the following items:
1 x Modular Micro handle
1 x Roughing Gouge
1 x Spindle Gouge
1 x Skew Chisel
1 x Parting Tool
1 x Round Nose Scraper
1 x Box Hollowing Scraper

The leather tool roll is an easy way to carry your tools and keep your tools safe and in good condition. It also has extra pockets in so that an additional blades from the micro tool range can be added.

The Robert Sorby Micro Modular Tool Kits as seen in the Summer 2012 edition of The Woodworker & Woodturner magazine....
Scores 5 out of 5 for value for money and 4 out of 5 for performance!






Related products:
1. Robert Sorby 888HS12 12 piece Modular Micro Woodturning Tool Set
2. Robert Sorby 86HS Pen Turning Set
3. Robert Sorby 5HSTROLL 5 Piece Turning Set in Leather Tool Roll
Crown 220 Woodcarving Set

Crown 220 Woodcarving Set


Price: £31.92
(Excluding VAT at 20%)

Quantity:


The Crown 220 Woodcarving Set is an ideal beginners set and gift. These small carving tools, made from high quality hardened and tempered Carbon steel have Beech handles. The ready honed blades feature 5/16" (8mm) Square Chisel, 5/16" (8mm) Bent Square Chisel, 5/16" (8mm) Skew Chisel, 3/16" (5mm) Straight Gouge, 5/16" (8mm) Bent Gouge and 3/16" (5mm) Bent "V" Tool.

All prices are shown exclusive of VAT


Related products:
1. Robert Sorby Full Size Carving Tools
2. Robert Sorby Micro Carving Tool Sets
Robert Sorby Carving Tool Sets

Robert Sorby Carving Tool Sets

Quantity:

Please select required set:


Robert Sorby Carving Tools are available as sets of 6 or 12.

Each Set contains the following pieces:

606 - Set of 6 contains:
6002 - Skew Chisel 3/8" (10mm)
6004 - Straight Gouges 1/2" (13mm)
6005 - Straight Gouge 1/4" (6mm)
6007 - Straight Gouge 1/8" (3mm)
6016 - Bent Gouge 3/8" (10mm)
6039 - V Tools 1/8" (3mm)

612A - Set of 12 contains:
6001 - Square Chisel 3/8" (10mm)
6002 - Skew Chisel 1/8" (3mm)
6004 - Straight Gouge 1/4" (6mm)
6004 - Straight Gouge 3/4" (19mm)
6005 - Straight Gouge 1/8" (3mm)
6005 - Straight Gouge 1/2" (13mm)
6006 - Straight Gouge 3/8" (10mm)
6008 - Straight Gouge 3/4" (19mm)
6011 - Veiner 1/16" (1.5mm)
6014 - Bent Gouge 3/4" (19mm)
6027 - Spoon Bit Gouge 3/8" (10mm)
6039 - V Tool 1/4" (6mm)

All prices are shown exclusive of VAT
NEW! Joseph Marples Trial 1 Box Set

NEW! Joseph Marples Trial 1 Box Set


Price: £113.36
(Excluding VAT at 20%)

Quantity:

The NEW Joseph Marples Trial 1 Box set contains the T09 9" Square, T14 Mortice Gauge, T15 Mitre Square, T20 Sliding Bevel and a 25 Marking Knife to complete the set. A great set all boxed together in a fine presentation box. The perfect gift for any tool lover.




Related products:
1. Joseph Marples T14 'Trial 1' Mortice & Marking Gauge
2. Joseph Marples 'Trial 1' Try Square
3. Joseph Marples T15 'Trial 1' Double Brass Faced Mitre Square
4. Joseph Marples T20 'Trial 1' Sliding Bevel
5. Crown Marking Knife
Robert Sorby 67HS Beginners Turning Tool Set

Robert Sorby 67HS Beginners Turning Tool Set


Price: £101.36
(Excluding VAT at 20%)

Quantity:

The Robert Sorby 6 piece Beginners Turning Tool Set is the ultimate full size all round woodturning tool set. This is perfect for the beginner who is interested in any type of turning from bowl to spindles. These are also 6 of the tools used by even the most experienced turner also. Made from selected High Speed Steel, hardened and tempered with polished flutes and hand finished ash handles.

The set contains:
~ 3/4" Roughing Gouge - turns square to round
~ 1/8" Parting Tool - for parting off work at the end and also adding detail
~ 3/8" Bowl Gouge - a must for making bowls
~ 3/8" Spindle Gouge - puts details on spindles
~ 3/4" Rectangular Shaped Skew (810H) - planes spindle work
~ 1/2" Round Nose Scraper - for finishing face plate work

Supplied in a presentation style box. This is truely an excellent buy as the cost of all these tools bought individually would be over £160!!

All prices are shown exclusive of VAT


Related products:
1. Crown H.S.S. Woodturning Sets
2. Crown H.S.S. 8 Piece Woodturning Sets
3. Crown Miniature H.S.S. Woodturning Set
4. Crown 291 H.S.S.Three Piece Bowl Gouge Set
5. Crown 280PM Pro-PM Powder Metallurgy High Speed Steel Turning Tool Set
Robert Sorby 520 Gilt Edge Chisel - Rosewood Handle

Robert Sorby 520 Gilt Edge Chisel - Rosewood Handle

Quantity:

Please select required tool/set:

Beautiful in every way, the Robert Sorby Gilt Edge Chisel with Rosewood Handle is one of the finest bevel edged chisel in the world. Aesthetic and functional, this chisel has excellent balance to assist with your work.

Available in a variety of sizes and in a set of 5.
Set of 5 contains one each of the following: 1/4", 3/8", 1/2", 3/4" and 1"

All prices are shown exclusive of VAT


Related products:
1. Robert Sorby 510 Gilt Edge Chisel - Boxwood Handle
2. Robert Sorby 166 Bevel Edge Chisel - Boxwood Carving Handle
3. Robert Sorby 167 Traditional Bevel Edge Chisel - Octagonal Boxwood Handle
4. Robert Sorby 241 Paring Chisel - Boxwood Handle
5. Crown Bevel Edge Chisel
Robert Sorby 510 Gilt Edge Chisel - Boxwood Handle

Robert Sorby 510 Gilt Edge Chisel - Boxwood Handle

Quantity:

Please select required size/set:

This dense, close grained hardwood handled chisel has been the craftsman's choice for centuries. The Robert Sorby Gilt Edge Chisel is fitted with a tapered brass ferrule for comfort and elegance.

Available in a variety of sizes and in a set of 5.

Set of 5 contains one each of the following: 1/4", 3/8", 1/2", 3/4" and 1".


All prices are shown exclusive of VAT


Related products:
1. Robert Sorby 520 Gilt Edge Chisel - Rosewood Handle
2. Robert Sorby 166 Bevel Edge Chisel - Boxwood Carving Handle
3. Crown Bevel Edge Chisel
4. Robert Sorby 167 Traditional Bevel Edge Chisel - Octagonal Boxwood Handle
5. Robert Sorby 241 Paring Chisel - Boxwood Handle
Crown Micro H.S.S. Turning Set

Crown Micro H.S.S. Turning Set

Quantity:

Please select a size

Crown’s Micro Turning Set are unique as they are the smallest commercially available with 2" (51mm) High Speed Steel blades and 4 ½" (114mm) rosewood handles. These are a five piece set comprising of: 3/32" (2.4mm) Gouge, a 3/16" (4.8mm) Gouge, a 3/32" (2.4mm) Parting Chisel, a 5/32" (4mm) Oval Skew Chisel and a 5/32" (4mm) Round Nose Scraper.
These are also available with double ended blades and the facility to adjust blade lengths (297 & 298). Both fixed and adjustable blade sets are available in either a Display Box or a Wooden Box.
All prices are shown exclusive of VAT


Related products:
1. Crown 220 Woodcarving Set
2. Crown H.S.S. Woodturning Sets
3. Crown H.S.S. 8 Piece Woodturning Sets
4. Robert Sorby 67HS Beginners Turning Tool Set
5. Robert Sorby Micro Carving Tool Sets
Crown Miniature H.S.S. Woodturning Set

Crown Miniature H.S.S. Woodturning Set

Quantity:

Please select a size

The Crown Miniature Woodturning Set includes five tools and their size will enable finer detail to your turning work. Available in either a display box or a wooden presentation box.
The set is made up of: a 1/8" (3mm) Gouge, a ¼" (6mm) Gouge, a 1/16" (1.6mm) Parting Tool, a ¼" (6mm) Skew Chisel, and a ¼" (6mm) Round Nose Scraper.
All prices are shown exclusive of VAT


Related products:
1. Crown H.S.S. Woodturning Sets
2. Crown H.S.S. 8 Piece Woodturning Sets
3. Crown 220 Woodcarving Set
4. Robert Sorby 67HS Beginners Turning Tool Set
5. Robert Sorby Micro Tool Set 45HS
Crown Pen Turning Set

Crown Pen Turning Set

Quantity:

Please select required set:

The ideal set for pen making and other similar projects. The tools have 3.1/2" (89mm) H.S.S. blades and 5.1/2" (140mm) rosewood handles and the three piece set contains 1 x 1/4" (6mm) Bowl Gouge, 1 x 1/2" (13mm) Oval Skew Chisel and 1 x 1/8" (3mm) Pating Tool.

Now also available in a Cryogenic version! Specially heat treated tools mean they hold their edge for longer.

Supplied in a wallet.

The ideal gift for those who enjoy making fine pens!

All prices are shown exclusive of VAT


Related products:
1. Crown Miniature H.S.S. Woodturning Set
2. Crown Micro H.S.S. Turning Set
3. Robert Sorby Micro Tool Set 45HS
4. Robert Sorby Micro Tool Set 46HS
5. Robert Sorby 67HS Beginners Turning Tool Set
Crown 291 H.S.S.Three Piece Bowl Gouge Set

Crown 291 H.S.S.Three Piece Bowl Gouge Set


Price: £103.84
(Excluding VAT at 20%)

Quantity:

Crown’s three piece Bowl Gouge set offers the three essential tools for serious bowl turners and is available in a wooden presentation case. The set contains: a ¼" (6mm), a 3/8" (10mm) and a ½" (13mm) Bowl Gouge.

All prices are shown exclusive of VAT


Related products:
1. Crown Bowl Gouges
2. Crown H.S.S. Woodturning Sets
3. Crown H.S.S. 8 Piece Woodturning Sets
4. Robert Sorby Bowl Gouges
5. Robert Sorby 67HS Beginners Turning Tool Set
Crown H.S.S. 8 Piece Woodturning Sets

Crown H.S.S. 8 Piece Woodturning Sets

Quantity:

Please select a size

The Crown 8 piece woodturning set will provide all the essentials for your turning work. Available in either a display box or a wooden presentation case, you can keep your tools looking great whilst they are not at work.
The eight piece set contains: a ¾" (19mm) Roughing Out Gouge, a ¼" (6mm) Spindle Gouge, a ½" (13mm) Spindle Gouge, a ¼" (6mm) Parting Tool, a 1" (25mm) Square End Scraper, a ¾" (19mm) Round End Scraper, a ½" (13mm) Skew Chisel and a 1" (25mm) Skew Chisel.
All prices are shown exclusive of VAT


Related products:
1. Crown H.S.S. Woodturning Sets
2. Crown Miniature H.S.S. Woodturning Set
3. Crown 280PM Pro-PM Powder Metallurgy High Speed Steel Turning Tool Set
4. Robert Sorby 67HS Beginners Turning Tool Set
5. Robert Sorby Micro Tool Set 45HS
Crown H.S.S. Woodturning Sets

Crown H.S.S. Woodturning Sets

Quantity:

Please select a size

The Crown Woodturning Sets are the ideal gift for a wood turner or anyone interesting in starting out in this hobby. These are also economically priced. Presented in a display box, these sets are available in either a four piece or five piece set.

The four piece set contains: a ¾" (19mm) Roughing Out Gouge, a ¼" (10mm) Spindle Gouge, a ¼" (6mm) Parting Tool and a ½" (13mm) Skew Chisel.

The five piece set contains: ¾" (19mm) Roughing Out Gouge, 3/8" (10mm) Spindle Gouge, ¼" (6mm) Parting Tool, ½" (13mm) Round Nose Scraper and a ½" (13mm) Skew Chisel.

All prices are shown exclusive of VAT


Related products:
1. Crown 291 H.S.S.Three Piece Bowl Gouge Set
2. Crown 280PM Pro-PM Powder Metallurgy High Speed Steel Turning Tool Set
3. Crown H.S.S. 8 Piece Woodturning Sets
4. Robert Sorby 67HS Beginners Turning Tool Set
Crown 280PM Pro-PM Powder Metallurgy High Speed Steel Turning Tool Set

Crown 280PM Pro-PM Powder Metallurgy High Speed Steel Turning Tool Set


Price: £198.56
(Excluding VAT at 20%)

Quantity:

The exclusive Crown Pro-PM turning tools are considered an elitist range in the woodturning world. These are made from Powder Metal, in which the molten steel has been compressed and sintered giving the Pro-PM turning tools a cutting edge which lasts up to 4-5 times longer than that of a conventional High Speed Steel tool. The chisels are hardened to between 66° and 68° Rockwell meaning the tools have a vastly superior wear resistance, excellent grind-ability and superior toughness. They also have a high working hardness that is retained over a lengthy working life. The ergonomically designed stained black Ash handles fitted to these tools make the finished tools an unbeatable purchase. A must have for the serious wood turner or those who appreciate the finest tools.

Five Piece set contains:

230PMW - Roughing Gouge 3/4" (19mm)
236PMW - Spindle Gouge 1/4" (6mm)
241SPMW - Bowl Gouge 3/8" (10mm)
246PMW - Diamond Parting Tool 3/16" (5mm)
261PMW - Round Nose Scraper 3/4" (19mm)

All prices are shown exclusive of VAT


Related products:
1. Crown Roughing Out Gouge
2. Crown Detail Gouges
3. Crown Bowl Gouges
4. NEW! Crown Cryogenic Parting Tools
5. Crown Square End Scraper

World of Woodworking |  Tool Sets - Various Types